X20 system modules • Digital signal processing modules • X20CM1201
1312
X20 system User's Manual 3.10
4.16.2 X20CM1201
4.16.2.1 General information
The module can be used to configure and carry out simple movements. For this purpose, the module has one AB
encoder input and a total of 8 digital channels. Four of them are inputs, and the other 4 can be set as either an
input or an output. Various output bit patterns are stored directly in the module.
The module is perfectly suited for easy to create drive control tasks for program and event controlled motor move-
ments. Feed movements using drives with 2 speeds and forward/reverse movement are created easily and effi-
ciently.
•
Command-dependent digital pattern output
•
Counter-dependent output circuit
•
Event-controlled abort criteria
•
4 digital inputs
•
4 digital channels, configurable as inputs or outputs
4.16.2.2 Order data
Model number
Short description
Figure
Digital signal processing and preparation
X20CM1201
X20 combination module, 1 AB incremental encoder, 24 V, 4
digital inputs 24 V, 4 channels 24 V configurable as inputs or
outputs, flexible digital controller logic
Required accessories
Bus modules
X20BM11
Bus module, 24 VDC keyed, internal I/O supply continuous
Terminal blocks
X20TB12
X20 terminal block, 12-pin, 24 VDC keyed
Table 423: X20CM1201 - Order data
Summary of Contents for X20 System
Page 2: ......