Coated modules • Bus receivers and Bus transmitters • X20cBR9300
X20 system User's Manual 3.10
2539
5.8.2 X20cBR9300
5.8.2.1 General information
With regard to hardware and software, this module is identical to the uncoated module of the same name.
The only differences are the:
•
Model number
•
Module ID
•
Environmental conditions
•
Additional coating (see chapter 5 "Coated modules")
For a complete description of the hardware and software, see 4.8.2 "X20BR9300".
5.8.2.2 Order data
Model number
Short description
Figure
Bus receivers and transmitters
X20cBR9300
X20 bus receiver, coated, X2X Link, supply for X2X Link and in-
ternal I/O supply, X20 locking plates (left and right) X20AC0SL1/
X20AC0SR1 included
Required accessories
Bus modules
X20cBM01
X20 supply bus module, coated, internal I/O supply interrupted
to the left
Terminal blocks
X20TB12
X20 terminal block, 12-pin, 24 VDC keyed
Optional accessories
X2X Link cable
X67CA0X99.1000
Cable for custom assembly, 100 m
X67CA0X99.5000
Cable for custom assembly, 500 m
Table 942: X20cBR9300 - Order data
5.8.2.3 Technical data
Product ID
X20cBR9300
Brief description
Bus receiver
X2X Link bus receiver with supply for I/O and bus
General information
B&R ID code
0xDD48
Status indicators
X2X bus function, overload, operating status, module status
Diagnostics
Module run/error
Yes, using status LED and software
Overload
Yes, using status LED and software
X2X bus function
Yes, using status LED
Power consumption
1)
Bus
1.62 W
Internal I/O
0.6 W
Additional power dissipation caused by the actua-
tors (resistive) [W]
-
Electrical isolation
I/O feed - I/O supply
No
X2X Link feed - X2X Link supply
Yes
Certification
CE
Yes
cULus
Yes
ATEX Zone 2
Yes
GOST-R
Yes
X2X Link supply input
Input voltage
24 VDC -15% / +20%
Input current
Max. 0.7 A
Fuse
Integrated, cannot be replaced
Reverse polarity protection
Yes
X2X Link supply output
Nominal output power
7.0 W
Parallel operation
Yes
2)
Table 943: X20cBR9300 - Technical data
Summary of Contents for X20 System
Page 2: ......
