Mechanical and electrical configuration
X20 system User's Manual 3.10
87
3.6.3 X20 shielding bracket
The X20 shielding bracket (model number X20AC0SF9.0010) is installed below the X20 system. The shield is
pressed against the shielding bracket using ground terminals from another manufacturer (e.g. PHOENIX or WAGO)
or a cable tie.
Attaching the shield with a ground terminal
Attaching the shield with a cable tie
Cable duct
①
Cable duct
①
Table 5: Cable shielding via X20 shielding bracket
To reduce the EMC emissions most effectively, the cable shield must be as long as possible after the cable tie
(see
①
in the diagram above).
Content of delivery
•
10 X20 shielding brackets
•
Installation template
Summary of Contents for X20 System
Page 2: ......
