X20 system modules • Counter modules • X20DC4395
870
X20 system User's Manual 3.10
Configure event ID for input function
Name:
CfO_DIREKTIOevent0IDwr to CfO_DIREKTIOevent1IDwr
This register holds the event ID generated by the direct input function. For a list of all possible event IDs, see
4.11.17.12.5.1 "List of event IDs"
Data type
Value
Information
INT
192 to 7,289
ID of event function
Configure the mode of the input function
Name:
CfO_DIREKTIOevent0mode to CfO_DIREKTIOevent1mode
The mode in which the direct input function operates can be set in this register.
Comparator functions can be operated in 4 different modes. For a description, see "Comparator modes".
Data type
Value
USINT
See bit structure.
Bit structure:
Bit
Description
Value
Information
0
Off
1
Single
2
State change
0 - 1
Comparator mode
3
Continuous
2 - 7
Reserved
-
Comparator status for comparator mask
Name:
CfO_DIREKTIOevent0compState to CfO_DIREKTIOevent1compState
This register contains the status bits that are compared with the bits specified in the "CfO_Ev0CompMask" register,
which contain the I/O input status, when an event is received.
Data type
Value
USINT
See bit structure.
Bit structure:
Bit
Description
Value
Information
0
Comparator status of channel 1
0 or 1
...
...
7
Comparator status of channel 8
0 or 1
Configure the comparator mask for the input function
Name:
CfO_Ev0CompMask to CfO_Ev1CompMask
If a bit is set, then the input status of the respective channel is compared with that bit in the
"CfO_DIREKTIOeventcompState" register.
Data type
Value
USINT
See bit structure.
Bit structure:
Bit
Description
Value
Information
0
Do not compare bit
0
Channel 1
1
Compare bit in register
...
...
0
Do not compare bit
7
Channel 8
1
Compare bit in register
Summary of Contents for X20 System
Page 2: ......
