Technical data • Individual components
84
Panel PC 2100 swing arm user's manual V1.12
3.4 Interface options
Information:
Please note that not every interface option can be installed in interface slots IF1 and IFx. For more
"IF option slot (IF1, IFx)" on page 43
.
Information:
Interface options can only be installed and replaced by B&R.
3.4.1 5ACCIF01.FPCC-000
3.4.1.1 General information
Interface option 5ACCIF01.FPSC-000 is equipped with a POWERLINK interface, 2 CAN bus master interfaces
and an X2X Link master interface. 512 kB of nvSRAM is also installed.
•
1x POWERLINK interface managing or controlled node
•
2x CAN bus master interfaces
•
1x X2X Link master interface
•
512 kB nvSRAM
•
Compatible with the APC2100 and PPC2100
This interface option can only be operated with Automation Runtime.
3.4.1.2 Order data
Model number
Short description
Figure
Interface options
5ACCIF01.FPCC-000
Interface card - 2x CAN interfaces - 1x X2X Link interface -
1x POWERLINK interface - 512 kB nvSRAM - For APC2100/
PPC2100 - Only available with a new device
Optional accessories
Terminal blocks
0TB1210.3100
Connector 300 VDC - 10-pin female - Cage clamp terminal block
- Protected against vibration by the screw flange
Table 62: 5ACCIF01.FPCC-000 - Order data
3.4.1.3 Technical data
Information:
The following characteristics, features and limit values only apply to this accessory and can deviate
from those specified for the complete system. The data specifications for the complete system take
precedence over those of individual components.
Model number
5ACCIF01.FPCC-000
General information
LED status indicators
L1, L2, L3
B&R ID code
0xE9BD
Certification
CE
Yes
UL
cULus E115267
Industrial control equipment
HazLoc
cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T4
1)
Controller
nvSRAM
Size
512 kB
Remanent variables in power failure mode
256 kB
(for e.g. Automation Runtime, see Automation Help)
Table 63: 5ACCIF01.FPCC-000 - Technical data
