Accessories • Power connectors
232
Panel PC 2100 swing arm user's manual V1.12
Chapter 6 • Accessories
The following accessories have successfully completed functional testing at B&R and can be used with this device.
Nevertheless, it is important to observe any limitations that may apply to the complete system when operated with
other individual components. When operating the complete system, all individual specifications for the components
must be observed.
All components listed in this manual have been subjected to extensive system and compatibility testing and are
approved for use accordingly. B&R cannot guarantee the functionality of non-approved accessories.
1 Power connectors
1.1 0TB103.9x
1.1.1 General information
This 1-row, 3-pin 0TB103 terminal block is used to connect the power supply.
1.1.2 Order data
Model number
Short description
Figure
Accessories
0TB103.9
Connector 24 VDC - 3-pin female - Screw clamp terminal block
3.31 mm²
0TB103.91
Connector 24 VDC - 3-pin female - Cage clamp terminal block
3.31 mm²
Table 229: 0TB103.9, 0TB103.91 - Order data
1.1.3 Technical data
Information:
The following characteristics, features and limit values only apply to this accessory and can deviate
from those specified for the complete system. The data specifications for the complete system take
precedence over those of individual components.
Model number
0TB103.9
0TB103.91
General information
Certification
CE
Yes
UL
cULus E115267
Industrial control equipment
HazLoc
cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T4
1)
DNV GL
Temperature:
B
(0 - 55°C)
Humidity:
B
(up to 100%)
Vibration:
A
(0.7 g)
EMC:
B
(Bridge and open deck)
Terminal block
Note
Protected against vibration by the screw flange
Nominal values according to UL
Number of pins
3 (female)
Type of terminal block
Screw clamp terminal block
Cage clamp terminal block
2)
Cable type
Only copper wires (no aluminum wires!)
Distance between contacts
5.08 mm
Table 230: 0TB103.9, 0TB103.91 - Technical data
