Commissioning and operation • Safety
84
8JSA user's manual V1.00
Chapter 6 • Commissioning and operation
1 Before commissioning and operation
Read this user's manual completely before starting any commissioning activities or operation.
In addition, take into account the technical documentation for all other machine components (e.g. the B&R drive
system) as well as the finished machine.
2 Safety
Commissioning is only permitted to be carried out by qualified personnel
1)
Only use appropriate equipment and tools. Protect yourself with safety equipment.
Caution!
Severe personal injury and damage to property due to failure of the servo drive!
If the servo drive fails, an uncontrolled motor can cause damage.
Electronic devices are generally not failsafe!
•
Ensure that the motor is brought into a safe state if the servo drive fails.
2.1 General sources of danger
Tampering of protection or safety devices
Protective and/or safety devices protect you and other persons from dangerous voltage, rotating or moving ele-
ments and hot surfaces.
Danger!
Personal injury and damage to property due to tampering of protective equipment!
If protective or safety devices are removed or put out of operation, there is no longer any personal
protection and serious personal injury and damage to property can occur.
•
Do not remove any safety devices.
•
Do not put any safety devices out of operation.
•
Always use all safety devices during short-term test and trial operations!
Dangerous voltage
To operate the motors, dangerous voltage must be applied to certain parts.
1)
You can find the definition of "qualified personnel" in chapter "General", subchapter "Safety".
