Technical data
Automation Panel 5000 User's manual V2.11
113
4.2.3.2 5ACCMA00.0001-000
4.2.3.2.1 General information
The mounting unit is installed on the back of the panel. It protects the installed link module / system unit, enabling
IP65 protection for the complete system. The flange is installed on the mounting unit. Due to the symmetrical design
of the back of the panel, it is possible to install the mounting unit in 2 directions. If a flange is selected for mounting,
flange output is possible towards the top or bottom.
A USB interface is available on the side of the mounting unit for service purposes.
•
Protects the installed link module / system unit
•
For swing arm mounting with flange
•
USB 2.0 interface
•
IP65 protection
4.2.3.2.2 Order data
Model number
Short description
Figure
Mounting units
5ACCMA00.0001-000
AP5000 swing arm mounting unit - 1x rear USB interface
Optional accessories
Flange
5ACCFL00.0000-000
AP5000 flange - Swing arm rotary flange - For swing arm mount-
ing unit
5ACCFL00.0100-000
AP5000 flange - Swivel-tilt flange for swing arm - For swing arm
mounting unit
5ACCFL00.0200-000
AP5000 flange - Swing arm flange adapter - For Rittal - For
swing arm mounting unit
Table 41: 5ACCMA00.0001-000 - Order data
4.2.3.2.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for these individual
components and may differ from those of the complete system. The data specified for the complete
system applies to the complete system in which this individual component is used, for example.
Model number
5ACCMA00.0001-000
General information
Certifications
CE
Yes
EAC
Product family certification
UL
cULus E115267
Industrial control equipment
Interfaces
USB
Quantity
1
Type
USB 2.0
Variant
Type A
Transfer rate
Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (30 Mbit/s)
Current-carrying capacity
Max. 500 mA
Operating conditions
Pollution degree per EN 61131-2
Pollution degree 2
Degree of protection per EN 60529
IP65
1)
Degree of protection per UL 50
Type 4X indoor
1)
Mechanical properties
Housing
Material
Aluminum, coated
Coating
White aluminum (similar to RAL 9006)
Installation
Swing arm (with flange)
Dimensions
Width
280 mm
Height
259 mm
Depth
96 mm
Weight
2500 g
Table 42: 5ACCMA00.0001-000 - Technical data
1)
Only with proper installation on the panel and proper installation on the swing arm.
