Standards and certifications
Automation Panel 9xD - Hygienic design User's manual V 1.80
127
8 Standards and certifications
8.1 Directives and declarations
8.1.1 CE marking
All directives applicable to the respective product and their harmonized EN standards
are met.
8.1.2 EMC Directive
These devices meet the requirements of EC directive "2014/30/EU Electromagnetic compatibility" and are designed
for the following application areas:
EN 61131-2:2007 +
Ber 1:2009-01
Programmable controllers - Part 2: Equipment requirements and tests
EN 61000-6-2:2005 +
AC:2011
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for in-
dustrial environments
EN 61000-6-4:2007 +
A1:2011
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission stan-
dard for industrial environments
8.1.3 Low voltage directive
These devices meet the requirements of the EC directive "2014/35/EU Low Voltage Directive" and are designed
for the following application areas:
EN 61131-2:2007 +
Ber 1:2009-01
Programmable controllers - Part 2: Equipment requirements and tests
EN 60204-1:2006 +
A1:2009
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
The low voltage directive applies to equipment that can be used with a nominal voltage between 50 and 1000 VAC
and between 75 and 1500 VDC.
8.2 Certifications
Danger!
A complete system can only receive certification if ALL individual components installed and connected
in it have the corresponding certifications. If an individual component is used that does NOT have the
corresponding certification, the complete system will also NOT be certified.
B&R products and services comply with applicable standards. These are international standards from organizations
such as ISO, IEC and CENELEC, as well as national standards from organizations such as UL, CSA, FCC, VDE,
ÖVE, etc. We pay special attention to the reliability of our products in the industrial sector.
Unless otherwise specified, the following certifications apply:
Information:
Currently valid certifications are listed on the serial number adhesive label of the device.
