Technical data • Individual components
Chapter 2
Technical data
Automation PC 810 with GM45 CPU board user's manual V1.28
117
3.6.7 5AC801.SSDI-02
3.6.7.1 General information
This 180 GB slide-in compact SSD (Solid State Drive) drive can be used in APC810 and PPC800 system units.
SSD is based on Multi Level Cell (MLC) technology.
When used in an APC810
Information:
The slide-in compact SSD cannot be used in the 5 card slot version of the APC810 in slide-in slot 2
with the 5AC801.ADAS-00 adapter.
When inserted in the slide-in compact slot, the slide-in compact drive is referred to internally as SATA.
3.6.7.2 Order data
Model number
Short description
Figure
Drives
5AC801.SSDI-02
180 GB SATA SSD (MLC), Slide-in compact
Optional accessories
Drives
5MMSSD.0180-00
180 GB SATA SSD (MLC); Spare part for 5AC801.SSDI-02;
SSD for 5PP5IO.GMAC-00; Remark: Please see manual for
proper use of the SSD.
Table 69: 5AC801.SSDI-02 - Order data
3.6.7.3 Technical data
Caution!
A sudden loss of power may result in data loss! In very rare cases, mass memory may also be damaged.
To prevent damage and loss of data, the use of a UPS device is recommended.
Information:
The following characteristics, features and limit values only apply to this accessory and can deviate
from those specified for the fully assembled device. The data specifications for the fully assembled
device take precedence over those of individual components.
Product ID
5AC801.SSDI-02
General information
Certification
CE
Yes
cULus
Yes
GL
Yes
Solid state drive
Capacity
180 GB
Data reliability
< 1 unrecoverable errors in 10
16
bit read accesses
MTBF
1,200,000 hours
S.M.A.R.T. support
Yes
Interface
SATA
Maintenance
None
Continuous reading
Max. 550 MB/s with SATA 6 Gbit/s
Max. 280 MB/s with SATA 3 Gbit/s
Continuous writing
Max. 520 MB/s with SATA 6 Gbit/s
Max. 260 MB/s with SATA 3 Gbit/s
Table 70: 5AC801.SSDI-02 - Technical data
