Technical data • Individual components
Chapter 2
Technical data
Automation PC 810 with GM45 CPU board user's manual V1.28
147
3.6.19 5MMSSD.0060-00
3.6.19.1 General information
This 60 GB slide-in compact SSD (solid state drive) drive can be used as a replacement or accessory part. This
SSD is based on multi-level cell (MLC) technology.
•
Replacement drive for 5AC801.SSDI-01 or 5AC901.CSSD-01 SSD drives
•
Accessory for the APC510 (optional SSD for I/O board)
3.6.19.2 Order data
Model number
Short description
Figure
Drives
5MMSSD.0060-00
60 GB SATA SSD (MLC); Spare part for 5AC801.SSDI-01; SSD
for 5PP5IO.GMAC-00; Remark: Please see manual for proper
use of the SSD.
Table 93: 5MMSSD.0060-00 - Order data
3.6.19.3 Technical data
Caution!
A sudden loss of power may result in data loss! In very rare cases, mass memory may also be damaged.
To prevent damage and loss of data, the use of a UPS device is recommended.
Information:
The following characteristics, features and limit values only apply to this accessory and can deviate
from those specified for the fully assembled device. The data specifications for the fully assembled
device take precedence over those of individual components.
Product ID
5MMSSD.0060-00
General information
Certification
CE
Yes
cULus
Yes
Solid state drive
Capacity
60 GB
Data reliability
< 1 unrecoverable errors in 10
16
bit read accesses
MTBF
1,200,000 hours
S.M.A.R.T. support
Yes
Interface
SATA
Maintenance
None
Continuous reading
Max. 550 MB/s with SATA 6 Gbit/s
Max. 280 MB/s with SATA 3 Gbit/s
Continuous writing
Max. 475 MB/s with SATA 6 Gbit/s
Max. 245 MB/s with SATA 3 Gbit/s
IOPS
1)
4k read
15000
4k write
Typical
23000
Maximum
80000
Endurance
MLC flash
Yes
Compatibility
SATA Revision 3.0 complient
ACS-2
SSD Enhanced SMART ATA feature set
Native Command Queuing (NCQ) command
Table 94: 5MMSSD.0060-00 - Technical data
