Software • Windows Embedded Standard 2009
Chapter 4 Software
Automation PC 810 with GM45 CPU board user's manual V1.28
271
Function
Present
Local network bridge
✓
Codepages / User locales / Keyboards
✓
Disk Management Service
✓
Windows Installer Service
✓
Class Installer
✓
CoDevice Installer
✓
Media Player 6.4
✓
DirectX 9.0c
✓
Accessories
✓
Number of fonts
89
Table 231: Device functions in Windows Embedded Standard 2009
6.5 Installation
Upon request, Windows Embedded Standard 2009 can be preinstalled at B&R Austria on a suitable CompactFlash
card (min. 1GB). The system is then automatically configured when it is switched on for the first time. This procedure
takes approximately 10 minutes, with the device being rebooted a number of times.
6.6 Drivers
All drivers required for operation are preinstalled along with the operating system. If an older version of the
driver is still being used, the latest version can be downloaded and installed from the B&R website (
). It is important that Enhanced Write Filter (EWF) is disabled for this.
6.6.1 Touch screen driver
In order to operate Automation Panel 800 or Automation Panel 900 touch screen devices, you need to either install
the touch screen driver manually and update the touch screen interface in the device manager. The driver can be
downloaded from the Download area of the B&R website (
). Be sure to check whether the
Enhanced Write Filter (EWF) is enabled.
Information:
Required drivers can only be downloaded from the B&R website, not from manufacturer websites.
