Accessories • Optional accessories
Chapter 8 Accessories
ETAL210.1050-1 user's manual V1.00
21
2.1.4 Circuit
Sensor/Actuator
Signal designation
Terminal name
Signal type
X20TB12 - 1
Selector switch (SF 1)
Left switch position
X20TB12 - 1.1
BOOL
Selector switch (SF 1)
Right switch position
X20TB12 - 2.1
BOOL
Button (SF 2)
Green button
X20TB12 - 1.2
BOOL
Button (SF 3)
Red button
X20TB12 - 2.2
BOOL
X20TB12 - 2
Signal lamp (PF 1)
Green signal lamp
X20TB12 - 1.1
BOOL
Signal lamp (PF 2)
Yellow signal lamp
X20TB12 - 2.1
BOOL
Signal lamp (PF 3)
Red signal lamp
X20TB12 - 1.2
BOOL
X20TB12 - 3
Potentiometer (RA 1)
Analog value
X20TB12 - 2.1
INT / 0 - 10 VDC
2.1.5 Compatibility
This product is intended to be used with the ETAL210.1050-1. Using this product in combination with other X20
components is possible in principle, but requires a thorough examination of whether the I/O configuration matches
the wiring of this product.
Information:
Check whether the terminal block can be used on the desired device. For additional information, see
the data sheet of the product used.
Warning!
If the wiring of the product does not match the X20 components used, personal injury and damage
to property may occur.
2.1.6 Operation
The following is required for operation:
•
1x 24 V power supply unit 0TP650.07 from the ETA light system product series
•
1x cold appliance power supply cable (0TP370.76)
•
1x module bracket ETAL100.0000-2
Advice:
When combining with other products from the ETA light system product portfolio, you may need ad-
ditional components. For additional information, see the documentation of the product used.
2.1.7 Content of delivery
This product contains the following materials:
ETAL100.0200-1
