background image

Introduction  • Organization of notices

Chapter 1 Introduction

ETAL210.1050-1 user's manual V1.00

3

Chapter 1 • Introduction

1 Manual history

Version

Date

Change

0.10

May 2019

First internal version

1.1 INFOBOX: Current user's manual

Information:

B&R makes every effort to keep documents as current possible. The most current versions can be

downloaded from the B&R website (

www.br-automation.com

).

2 Note regarding additional documentation

This documentation describes the entire product and its intended use in addition to safety guidelines for using

the product.
For information about the components used in the product, see the documentation of the individual components

on our website. For an overview of the components used, see the technical data of this product.

3 Organization of notices

Safety guidelines

Contain 

only

 information that warns of dangerous functions or situations.

Signal word

Description

Danger!

Failure to observe these safety guidelines and notices will result in death, severe injury or substantial damage to property.

Warning!

Failure to observe these safety guidelines and notices can result in death, severe injury or substantial damage to property.

Caution!

Failure to observe these safety guidelines and notices can result in minor injury or damage to property.

Notice!

Failure to observe these safety guidelines and notices can result in damage to property.

Contain 

useful

 information for users and instructions for avoiding malfunctions.

Signal word

Description

Information:

Useful information, application tips and instructions for avoiding malfunctions.

European dimension standards apply to all dimension diagrams.

All dimensions in millimeters.

Unless otherwise specified, the following general tolerances apply:

Nominal dimension range

General tolerance per

DIN ISO 2768 medium

Up to 6 mm

±0.1 mm

Over 6 to 30 mm

±0.2 mm

Over 30 to 120 mm

±0.3 mm

Over 120 to 400 mm

±0.5 mm

Over 400 to 1000 mm

±0.8 mm

Summary of Contents for ETAL210.1050-1





























Reviews: