Safety notices • Responsibilities of the operator
Chapter 3
Safety notices
ETAL210.1050-1 user's manual V1.00
7
Chapter 3 • Safety notices
1 Safety notices
Warning!
Observe safety notices
Disregarding safety notices can result in serious damage to property and personal injury.
The safety notices on the product and in the documentation must be observed.
Products that cannot be ensured as safe due to damage, for example, are not permitted to be started
up under any circumstance. Disturbances that impair general safety must be eliminated immediately.
2 Usage
This product is designed and manufactured for training and development. General safety guidelines must be ob-
served at all times.
Caution!
Risk of injury
Disregarding safety notices can result in serious damage to property and personal injury.
The data sheets of components and the safety notices contained therein must be observed.
For a list of the components used, see the technical data of this product.
3 Electronics
The product is prewired and prepared for use. No additional wiring examples are required.
The power supply and communication, e.g. Ethernet, are implemented via cables with standard connector systems
such as RJ45.
Caution!
Electric shock
Incorrect or faulty supply elements can result in damage to property and personal injury.
Only power supply unit 0TP650.07, which is available as an accessory, is permitted to be used for the
power supply.
Connecting or disconnecting connectors and elements is only permitted in a voltage-free state.
4 Responsibilities of the operator
The operator is the person who operates the product or who provides it for use/application by a 3rd party while
carrying legal product responsibility for the protection of the user, personnel or other 3rd parties.
•
The operator is obliged to know and implement the applicable industrial safety regulations.
•
The operator is obliged to know and implement national, local and plant-specific regulations.
•
The operator is obliged to clearly define and manage responsibilities for installation, operation, fault cor-
rection, maintenance and cleaning.
•
The operator is obliged to ensure that responsible personnel have read and understood this user's manual.
