Technical data • Complete system
Chapter 2
Technical data
Automation Panel 9x3 User's Manual V1.00
19
2.2.4 Mounting orientations
The following diagrams show the approved mounting orientations for the Automation Panel 9x3. The AP9x3 must
be mounted as described in the following sections.
C
D
A
B
0°
0°
Figure 6: Automation Panel 9x3 - Mounting orientation
Mounting orientation
Ambient temperature limitation
0°
0°
None
A
-90° (counterclockwise)
None
B
+90° (clockwise)
None
C, D
±180° (interfaces on top)
None
C
-45°
None
D
+90° (display downwards)
None
Table 8: Mounting orientations in operation
In order to facilitate natural air circulation, devices must be mounted according to the spacing indicated in the
