Technical data • Individual components
32
Automation Panel 9x3 User's Manual V1.00
3 Individual components
3.1 Display units
3.1.1 5AP923.1215-00
3.1.1.1 General information
•
Display unit for AP9x3 or PPC900
•
12" TFT XGA color display
•
Single-touch (analog resistive)
•
Black aluminum front
•
IP65 protection (on front)
3.1.1.2 Order data
Model number
Short description
Figure
Undefined
5AP923.1215-00
Automation Panel 12.1" XGA TFT - 1024 x 768 pixels (4:3) -
Single-touch (analog resistive) - IP65 protection (front)
Table 29: 5AP923.1215-00 - Order data
3.1.1.3 Technical data
Product ID
5AP923.1215-00
General information
Certification
cULus
Yes
cULus HazLoc Class 1 Division 2
Yes
1)
Display
Type
Color TFT
Diagonal
12.1"
Colors
16.2 million
Resolution
XGA, 1024 x 768 pixels
Contrast
700:1
Viewing angles
Horizontal
Direction R / Direction L = 80°
Vertical
Direction U / Direction D = 80°
Backlight
Classification
LED
Brightness
500 cd/m²
Half-brightness time
2)
50,000 h
Touch screen
3)
Type
AMT
Technologies
Analog, resistive
Controller
B&R, serial, 12-bit
Transmittance
80% ±3%
Mechanical characteristics
Front
Frame
Aluminum paint
Design
Black
Gasket
3 mm built-in seal
Dimensions
Width
315 mm
Height
239 mm
Weight
2200 g
Table 30: 5AP923.1215-00 - Technical data
1)
Yes, although applies only if all components installed within the complete system have this certification
2)
At an ambient temperature of 25°C. Reducing the brightness by 50% can result in an approximately 50% increase in the half-brightness time.
3)
Touch screen drivers for approved operating systems are available in the Downloads section of the B&R website.