Accessories • Cables
Chapter 5 Accessories
Automation Panel 9x3 User's Manual V1.00
69
3.3 SDL cables with 45° male connector
3.3.1 5CASDL.0xxx-01
3.3.1.1 General information
5CASDL.0xxx-01 SDL cables with a 45° connector are designed for use in inflexible applications.
Caution!
Power must be turned off before plugging in and unplugging cables.
3.3.1.2 Order data
Model number
Short description
Figure
SDL cable - 45° connector
5CASDL.0018-01
SDL cable with 45° male connector, 1.8 m
5CASDL.0050-01
SDL cable with 45° male connector, 5 m
5CASDL.0100-01
SDL cable with 45° male connector, 10 m
5CASDL.0150-01
SDL cable with 45° male connector, 15 m
Table 53: 5CASDL.0018-01, 5CASDL.0050-01, 5CASDL.0100-01, 5CASDL.0150-01 - Order data
3.3.1.3 Technical data
Product ID
5CASDL.0018-01
5CASDL.0050-01
5CASDL.0100-01
5CASDL.0150-01
General information
Certification
CE
Yes
cULus
Yes
GL
Yes
1)
Cable structure
Wire cross section
AWG 28
AWG 24
Shielding
Individual cable pairs and entire cable
Cable shielding
Tinned copper mesh, optical coverage >85%
Outer sheathing
Material
PVC
Color
Black
Connector
Type
2x DVI-D (24+1), male
Connection cycles
100
Contacts
Gold-plated
Mechanical protection
Metal cover with crimped stress relief
Locating screw tightening torque
Max. 0.5 Nm
Electrical characteristics
Conductor resistance
AWG 24
-
≤93 Ω/km
AWG 28
≤237 Ω/km
-
Insulation resistance
Min. 10 MΩ/km
Mechanical characteristics
Dimensions
Length
1.8 m ±30 mm
5 m ±50 mm
10 m ±100 mm
15 m ±100 mm
Diameter
Max. 9 mm
Max. 11.5 mm
Flex radius
Fixed installation
≥5x cable diameter (connector - ferrite bead and ferrite bead - ferrite bead)
Flexibility
Limited flexibility; valid for ferrite bead - ferrite bead (tested 100 cycles with 5x cable diameter, 20 cycles / minute)
Weight
Approx. 300 g
Approx. 590 g
Approx. 2800 g
Approx. 2860 g
Table 54: 5CASDL.0018-01, 5CASDL.0050-01, 5CASDL.0100-01, 5CASDL.0150-01 - Technical data
1)
Yes, although applies only if all components installed within the complete system have this certification
