Accessories
Mobile Panel 7200 User's manual V 1.01
63
7.2 Wall mounts
Danger!
If a Mobile Panel stored in the wall mount is located in the danger zone of a machine or system, the
functionality of the stop button must be ensured.
The wall mount must therefore be positioned in a way that does not impair operation of the stop button.
Caution!
The wall mount should be installed in a location where the Mobile Panel is not exposed to direct heat
sources or sunlight.
7.2.1 5ACCWB70.0000-000
7.2.1.1 General information
The wall mount is used to store Mobile Panel 5MP7251.101P-000 and is only suitable for vertical, hanging instal-
lation. In order to use the wall mount, the supplied handle must be installed on the MP7200.
•
Wall mount for storing the 5MP7251.101P-000
7.2.1.2 Order data
Model number
Short description
Figure
Accessories
5ACCWB70.0000-000
Mobile Panel 7200 wall mount - For MP7251
Table 16: 5ACCWB70.0000-000 - Order data
7.2.1.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Model number
5ACCWB70.0000-000
General information
Certifications
CE
Yes
Mechanical properties
Dimensions
Width
142.0 mm
Height
214.1 mm
Depth
40.0 mm
Table 17: 5ACCWB70.0000-000 - Technical data
