Software • BIOS options
170
Power Panel 500 user's manual V1.40
1.4.3.1 LPC devices
InsydeH2O Setup Utility Rev. *
OEM Features
Show the base I/O address
for panel port.
Ressource Conflict is
marked with a star (*).
I/O Board LPC Devices
COMC
COMD
Base I/O Address
<2E8>
Interrupt
<IRQ10>
Interrupt
<IRQ11>
Base I/O Address
<3E8>
F1
F9
Esc
Enter
F10
Help Select Item
Change Values Setup Defaults
Exit Select Menu
Select SubMenu
Save and Exit
F5/F6
Figure 97: US15W OEM Features - I/O Board Features - LPC Devices
BIOS setting
Function
Configuration options
Effect
COMC
Setting for the panel interface on the I/O board
None
-
Selects the base I/O address of the COM port
Disabled, 238, 2E8,
2F8, 328, 338, 3E8, 3F8
Disables or assigns the selected base I/O ad-
Interrupt
Selects the interrupt for the COM port
IRQ3, IRQ4, IRQ5, IRQ6,
IRQ10, IRQ11, IRQ12
Assigns the selected interrupt
COMD
Setting for the serial interface (COM) on the I/O
board
None
-
Selects the base I/O address of the COM port
Disabled, 238, 2E8,
2F8, 328, 338, 3E8, 3F8
Disables or assigns the selected base I/O ad-
Interrupt
Selects the interrupt for the COM port
IRQ3, IRQ4, IRQ5, IRQ6,
IRQ10, IRQ11, IRQ12
Assigns the selected interrupt
Table 113: US15W OEM features - I/O board features - LPC devices - Configuration options
Information:
A resource conflict can occur with respect to the base I/O address or the interrupt settings (indicated
by a warning). In order to still be able to make these settings, the setting for the base I/O address or
interrupt currently being used must be changed first.
