Accessories • Line filter
280
Power Panel 500 user's manual V1.40
10 Line filter
10.1 5AC804.MFLT-00
10.1.1 General information
The 5AC804.MFLT-00 line filter may be necessary to satisfy requirements regarding conducted disturbances in
supply lines in accordance with the 2003 edition of GL EMC1 (Germanischer Lloyd).
The line filter should be installed as close to the end device as possible; the supply line from the end device to the
line filter should be kept as short as possible.
10.1.2 Order data
Model number
Short description
Figure
Accessories
5AC804.MFLT-00
Line filter
Table 214: 5AC804.MFLT-00 - Order data
10.1.3 Technical data
Information:
The following characteristics, features and limit values only apply to this accessory and can deviate
from those specified for the complete system. The data specifications for the complete system take
precedence over those of individual components.
Product ID
5AC804.MFLT-00
General information
Certification
CE
Yes
cULus
Yes
cULus HazLoc Class 1 Division 2
Yes
1)
GOST-R
Yes
GL
Yes
2)
Terminal block
Connection cross section
With wire end sleeves
1.5 mm²
Flexible
0.2 to 1.5 mm²
Inflexible
0.2 to 2.5 mm²
Electrical characteristics
Nominal voltage
24 VDC -25% / +30%
Nominal current
8 A
Environmental conditions
Temperature
Operation
-25 to 65°C
Storage
-25 to 65°C
Transport
-25 to 65°C
Mechanical characteristics
Housing
Material
Galvanized steel plate
Dimensions
Width
54 mm
Length
94 mm
Depth
32.15 mm
Weight
205 g
Table 215: 5AC804.MFLT-00 - Technical data
1)
Yes, although applies only if all components installed within the complete system have this certification and the complete system itself carries the corresponding
mark.
2)
Yes, although applies only if all components installed within the complete system have this certification
