Technical data • Individual components
Chapter 2
Technical data
Power Panel 500 user's manual V1.40
109
3.4.3 5PP5IF.FETH-00
3.4.3.1 General information
The interface board 5PP5IF.FETH-00 has a 10/100/1000 Mbit/sec network connection, 512 kB SRAM and can be
used as an additional network interface in a Power Panel 500, Automation PC 510 or Automation PC 511.
•
1 network connection (10/100/1000 Mbit/s)
•
512 kB SRAM
•
Compatible with the PP500, APC511 and APC511
This interface board can only be operated with Automation Runtime (beginning with Automation Studio 3.0.90.18
and Automation Runtime D4.01).
3.4.3.2 Order data
Model number
Short description
Figure
Interface boards
5PP5IF.FETH-00
Ethernet interface card - 1 Ethernet 10/100/1000 - 512 kB SRAM
Table 58: 5PP5IF.FETH-00 - Order data
3.4.3.3 Technical data
Product ID
5PP5IF.FETH-00
General information
B&R ID code
0xB7C4
Diagnostics
Data transfer
Yes, using status LED
Certification
CE
Yes
cULus
Yes
GOST-R
Yes
GL
Yes
1)
Controller
SRAM
Value
512 kB
Battery-backed
Yes
Remanent variables in power failure mode
256 kB (e.g. for Automation Runtime, see AS help system)
2)
Interfaces
Ethernet
Quantity
1
Controller
Intel 82574
Design
Shielded RJ45 port
Transfer rate
10/100/1000 Mbit/s
Cable length
Max. 100 m between two stations (segment length)
Electrical characteristics
Power consumption
4 W
Environmental conditions
Temperature
Operation
0 to 50°C
Storage
-20 to 60°C
Transport
-20 to 60°C
Relative humidity
Operation
5 to 90%, non-condensing
Storage
5 to 95%, non-condensing
Transport
5 to 95%, non-condensing
Table 59: 5PP5IF.FETH-00 - Technical data
1)
Yes, although applies only if all components installed within the complete system have this certification.
2)
With optimized access using write combining
