Technical data • Individual components
Chapter 2
Technical data
Power Panel 500 user's manual V1.40
121
3.5 I/O boards
Information:
I/O boards can ONLY be installed and replaced by B&R.
Information:
I/O boards can only be operated in the system unit 5PP520.0573-01.
3.5.1 5PP5IO.GNAC-00
3.5.1.1 General information
The 5PP5IO.GNAC-00 I/O board has 1x RS232/422/485 interface, 1x USB 2.0 connection, 1x HDA sound con-
nection and 1x female Smart Display Link/DVI connector. This I/O board can be connected to and operated on
Power Panel 500 and Automation PC 511 systems with an I/O board slot.
•
1x USB 2.0
•
1x RS232/422/485
•
1x HDA sound
•
1x Smart Display Link / DVI
•
Compatible with the PP500 and APC511
3.5.1.2 Order data
Model number
Short description
Figure
I/O board
5PP5IO.GNAC-00
Interface board - 1 USB 2.0 - 1 RS232/422/485 - 1 HDA sound
- 1 SDL/DVI-D
Table 82: 5PP5IO.GNAC-00 - Order data
3.5.1.3 Technical data
Product ID
5PP5IO.GNAC-00
General information
B&R ID code
0xB4DD
Certification
CE
Yes
cULus
Yes
GOST-R
Yes
Interfaces
COM2
1)
Type
RS232/422/485, electrically isolated
Design
9-pin female DSUB connector
UART
16550-compatible, 16-byte FIFO
Max. baud rate
115 kbit/s
USB
Quantity
1
Type
USB 2.0
Design
Type A
Transfer rate
Low speed (1.5 Mbit/s), full speed (12 Mbit/s), high speed (480 Mbit/s)
Current load
Max. 1 A
Monitor/Panel interface
Design
Female DVI-I connector
Type
SDL/DVI
Audio
Type
HDA sound
Inputs
Microphone, Line IN
Outputs
Line OUT
Electrical characteristics
Power consumption
7 W
Table 83: 5PP5IO.GNAC-00 - Technical data
