General information • Guidelines
Chapter 1
General information
Power Panel 500 user's manual V1.40
15
3 Organization of safety notices
Safety notices in this manual are organized as follows:
Safety notice
Description
Danger!
Disregarding these safety guidelines and notices can be life-threatening.
Warning!
Disregarding these safety guidelines and notices can result in severe injury or substantial damage to equipment.
Caution!
Disregarding these safety guidelines and notices can result in injury or damage to equipment.
Information:
This information is important for preventing errors.
Table 3: Description of the safety notices used in this documentation
4 Guidelines
E
European dimension standards apply to all dimension diagrams in this document.
All dimensions are specified in mm.
Range of nominal sizes
General tolerance according to
DIN ISO 2768 (medium)
Up to 6 mm
±0.1 mm
For 6 to 30 mm
±0.2 mm
For 30 to 120 mm
±0.3 mm
For 120 to 400 mm
±0.5 mm
For 400 to 1000 mm
±0.8 mm
Table 4: Range of nominal sizes
