Software • BIOS options
Chapter 4 Software
Power Panel 500 user's manual V1.40
161
1.4.1.1 LPC devices
InsydeH2O Setup Utility Rev. *
OEM Features
Show the base I/O address
for serial port.
Ressource Conflict is
marked with a star (*).
CPU Board LPC Devices
COMA
Interrupt
<IRQ4>
Base I/O Address
<3F8>
F1
F9
Esc
Enter
F10
Help Select Item
Change Values Setup Defaults
Exit Select Menu
Select SubMenu
Save and Exit
F5/F6
Figure 88: US15W OEM Features - CPU Board Features - LPC Devices
BIOS setting
Function
Configuration options
Effect
COMA
Settings for the COM serial interface
None
-
Selects the base I/O address of the COM port
Disabled, 238, 2E8,
2F8, 328, 338, 3E8, 3F8
Disables or assigns the selected base I/O ad-
Interrupt
Selects the interrupt for the COM port
IRQ3, IRQ4, IRQ5, IRQ6,
IRQ10, IRQ11, IRQ12
Assigns the selected interrupt
Table 104: US15W OEM features - CPU board features - LPC devices - Configuration options
Information:
A resource conflict can occur with respect to the base I/O address or the interrupt settings (indicated
by a warning). In order to still be able to make these settings, the setting for the base I/O address or
interrupt currently being used must be changed first.
