Software • BIOS options
Chapter 4 Software
Power Panel 500 user's manual V1.40
165
1.4.2 System unit features
InsydeH2O Setup Utility Rev. *
OEM Features
Adjust the brightness of
the local panel.
System Unit Features
Device ID:
0000B4CB
Compatibility ID:
0000
Vendor ID:
00000000
Hardware Revision:
A0
Serial Number:
B4CB0168435
Product Name:
5PP520.0573-01
Hardware Number:
00201849
Parent Device ID:
FFFFFFFF
Parent Compatib. ID:
FFFF
User Serial ID:
Not defined
Display (0) Brightness:
<Auto>
LPC Devices
Statistical Values
Temperature Values
F1
F9
Esc
Enter
F10
Help Select Item
Change Values Setup Defaults
Exit Select Menu
Select SubMenu
Save and Exit
F5/F6
Figure 92: US15W OEM Features - System Unit Features
BIOS setting
Function
Configuration options
Effect
Device ID
Displays the device code of the Power Panel de-
vice
None
-
Compatibility ID
Displays the version of the device within the same
B&R device ID. This ID is needed for Automation
None
-
Vendor ID
Displays the vendor ID
None
-
Hardware revision
Displays the system unit hardware revision
None
-
Serial number
Displays the B&R serial number
None
-
Product name
Displays the B&R model number
None
-
Hardware number
Displays the system unit hardware number
None
-
Parent device ID
Displays the manufacturer number
None
-
Parent compatib. ID
Displays the manufacturer ID
None
-
User serial ID
Displays the user serial ID. This 8-digit hexadeci-
mal value can be freely specified by the user (e.g.
to give the device a unique ID) and can only be
changed using the "B&R Control Center" includ-
ed with the ADI driver.
None
-
Auto
Automatically configures the optimal brightness
configured using the factory settings. A bright-
ness value between 100% and 0% is set.
Display (0) brightness
1)
Option for setting the intensity of the display back-
light
0%, 10%, 20%, 30%,
40%, 50%, 60%, 70%,
80%, 90%, 100%
Sets the desired brightness within the factory
setting limits
LPC devices
Configures LPC devices
Enter
Opens the submenu
Statistical values
Displays statistical values
Enter
Opens the submenu
See "Statistical values" on page 167
Temperature values
Displays current temperature values
Enter
Opens the submenu
See "Temperature values" on page 168
Table 108: US15W OEM features - System unit features - Configuration options
1)
This setting is only available for PP500 system units.
