Software-specific information
Power Panel C50 User's manual V1.10
49
6.1.1 Startup
The behavior during device startup is defined with the options in group "Terminal configuration / Startup":
Parameter
Setting/Description
Display AR status
Default setting: on
The terminal can display the status of the controller (Automation Runtime) on the screen during startup:
Selection
Description
off
The AR status is not displayed.
on
The AR status is displayed.
If the controller does not change to mode RUN after startup, a button will appear at the bottom right of the screen to open
"System Diagnostics Manager" (SDM).
For additional information about "System Diagnostics Manager", see Automation Help.
Display logo
Default setting: off
This option defines whether a boot logo (static and/or animated) is displayed while establishing the connection between
the terminal and web server (address specified under
with option "URL of application"):
Selection
Description
off
A logo is not displayed.
on
A logo is displayed.
Information:
To transfer logos from Automation Runtime to the terminal, the TFTP server must be enabled in the
CPU configuration.
6.1.1.1 Static boot logo
Parameter
Setting/Description
Logo
Default setting: None
Selects the boot logo:
Selection
Description
None
No boot logo selected.
[Dateiname].bmp
Boot logo "[Dateiname].bmp" selected.
A static boot logo for the Power Panel can be selected here that will be displayed during device startup and when estab-
lishing the connection to the web server.
Information about the boot logo:
6.1.1.2 Boot animation
Parameter
Setting/Description
Animation
Default setting: None
Selects the boot animation
Selection
Description
None
No boot animation selected.
[Dateiname].gif
Boot animation "[Dateiname].gif" selected.
An animated boot logo for the Power Panel can be selected here that will be displayed during device startup and when
establishing the connection to the web server. This will be placed on top of the static boot logo if necessary.
Information about the boot animation:
X-offset [pixel]
Defines the distance from an existing boot animation to the left edge of the display.
Y-offset [pixel]
Defines the distance from an existing boot animation to the top edge of the display.
Delay [ms]
Delay in milliseconds between individual images in the GIF animation. The individual values have the following effect:
Value [ms]
Description
0
In this case, the delay defined in the GIF file will be used.
If no delay is defined in the GIF file, 100 ms is used.
>0
Applies the set delay time.
It may not be possible to achieve small values due to the power limits of the device. In this case, the animation is displayed
slower than the value specified.