International and national certifications
368
X90 mobile system User's manual V 1.20 - Translation of the original manual
7.5 Overview of standards
Standard
Title
UN/ECE-R10
Regulation no. 10 of the United Nations Economic Commission for Europe (UNECE)
- Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility
ISO 7637-2
Road vehicles - Electrical disturbances from conduction and coupling
- Part 2: Electrical transient conduction along supply lines only
ISO 10605
Road vehicles
- Test methods for electrical disturbances from electrostatic discharge
ISO 11452-2
Road vehicles
- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy
- Part 2: Absorber-lined shielded enclosure
ISO 11452-4
Road vehicles
- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy
- Part 4: Bulk current injection (BCI)
ISO 11452-5
Road vehicles
- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy
- Part 5: Stripline
EN 13309
Construction equipment
- Electromagnetic compatibility of machines with internal power supply
ISO 13766
Earth-moving machinery
- Electromagnetic compatibility
EN ISO 14982
Agriculture and forestry machines
- Electromagnetic compatibility - Test methods and acceptance criteria
ISO 15003
Agricultural engineering - Electrical and electronic equipment
- Testing resistance to environmental conditions
ISO 16750-3
Road vehicles
- Environmental conditions and testing for electrical and electronic equipment
- Part 3: Mechanical loads
ISO 16750-4
Road vehicles
- Environmental conditions and testing for electrical and electronic equipment
- Part 4: Climatic loads
ISO 20653
Road vehicles
- Degrees of protection (IP code) - Protection of electrical equipment against foreign objects, water and access
EN 55011
(CISPR 11)
Industrial, scientific and medical (ISM) radio-frequency equipment
Electromagnetic disturbance characteristics - Limits and methods of measurement
EN 55016-2-1
(CISPR 16-2-1)
Specification for radio disturbance and immunity measuring apparatus and methods
- Part 2-1: Methods of measurement of disturbances and immunity -
Conducted disturbance measurements
EN 55016-2-3
(CISPR 16-2-3)
Specification for radio disturbance and immunity measuring apparatus and methods
- Part 2-3: Methods of measurement of disturbances and immunity -
Radiated disturbance measurements
EN 55022
(CISPR 22)
Information technology equipment
Limits and methods of measurement
EN 55025
(CISPR 25)
Vehicles, boats and internal combustion engines
- Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers
EN 60068-2-6
Environmental testing
- Part 2-6: Procedures - Test Fc: Vibration (sinusoidal)
EN 60068-2-27
Environmental testing
- Part 2-27: Test procedure - Test Ea and guidance: Shock
EN 60068-2-31
(replacement for
EN 60068-2-32)
Environmental testing
- Part 2-31: Test procedure - Test Ec: Rough handling shocks, mainly for devices
EN 60068-2-64
Environmental testing
- Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
EN 60529
Degrees of protection provided by enclosures (IP code)
EN 60664-1
Insulation coordination for equipment within low-voltage systems
- Part 1: Principles, requirements and tests
EN 60721-3-2
Classification of environmental conditions
- Part 3: Classification of groups of environmental parameters and their severities
- Section 2: Transportation
EN 60721-3-3
Classification of environmental conditions
- Part 3: Classification of groups of environmental parameters and their severities
Section 3: Stationary use at weatherprotected locations
EN 60721-3-5
Classification of environmental conditions
- Part 3: Classification of groups of environmental parameters and their severities
Section 5: Ground vehicle installations
EN 61000-4-2
Electromagnetic compatibility (EMC)
- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
EN 61000-4-3
Electromagnetic compatibility (EMC)
- Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
EN 61000-4-4
Electromagnetic compatibility (EMC)
- Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
EN 61000-4-5
Electromagnetic compatibility (EMC)
- Part 4-5: Testing and measuring techniques - Surge immunity test
EN 61000-4-6
Electromagnetic compatibility (EMC)
- Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
EN 61000-4-8
Electromagnetic compatibility (EMC)
- Part 4-8: Testing and measuring techniques - Power frequency magnetic field immunity test
EN 61000-4-11
Electromagnetic compatibility (EMC)
- Part 4-11: Testing and measurement techniques - Immunity tests for voltage dips, short interruptions and voltage variations
