14
OPTIFORMA Frame Heater 2872 01/22
The operation display „OFF“ shows the status
of the instrument with the last settings used
after switching on the instrument at the power
switch.
The operation display „ON“ shows the status of
the instrument with the current temperature and
the current remaining run time after switching on
the frame heater using the start/stop button.
The temperature display „Temp-IN“ shows the
temperature status with the current set tem-
perature after touching the mode select button
once.
The time display „Time-IN“ shows the time sta-
tus with the current set maximum run time after
touching the mode select button again.
The cooling display „COOLING“ automatically
shows the time status with the current remai-
ning run time (max. 6 s).
4.3 Overview of set buttons
Touch 1x
Temperature set mode
Touch again Time set mode
Touch again Initial setting OFF
Touch 1x Frame heater is working
Touch again
Heating switched off,
frame heater in cooling phase
Increase setting
Decrease setting
Fig. 4: Display image after
switching the power
switch on
Fig. 5: Display image after
switching the hea-
ting phase on
Fig. 6: Display input status
for temperature
Fig. 7: Display input status
for time
Fig. 8: Display status for remai-
ning run time
Fig. 9: Mode select button
Fig. 10: Start and stop button
Fig. 11: UP and DOWN
set button
Operation display
Temperature display
Time display
Cooling display
Mode select button
Start and stop button
UP and DOWN set button
Design and function