1.4 What’s Included
The following items are included with the Bandura Cyber TIG:
● Appliance
● Power Cord(s)
● Rack Mount Equipment
● Welcome Sheet
● Registration Packet
2 Configuration
This high-speed security appliance will filter out known threats and unwanted internet traffic at
line speeds. Although it is powerful, the Bandura Cyber TIG is simple to configure with an
intuitive graphical interface. This section of the manual is a thorough guide to setting up a new
Bandura Cyber TIG. See the
Bandura Cyber TIG Menu Reference
descriptions of the main screens of the Bandura Cyber TIG administration interface.
2.1 Initial Configuration
YOUR BANDURA CYBER TIG ARRIVES WITH AN ‘ALLOW ALL’ POLICY CONFIGURATION
Once the appliance is powered on, take a look at the back of the Bandura Cyber TIG and locate
the multiple ethernet ports. Depending on the model you have, you will see one or two ports
labeled ‘Outside’ and one or two ports labeled ‘Inside’, and a port labeled ‘Admin’. Any other
ports can be ignored for now.
We first want to set up the ‘Admin’ port, as this is the port where you will administer the Bandura
Cyber TIG. The ‘Admin’ port is also where your Bandura Cyber TIG will constantly receive
updated information from our servers. Connect an ethernet cable from the ‘Admin’ port of the
Bandura Cyber TIG to a switch inside your local network, then connect your computer to the
same switch.
9