The data that SNMP can retrieve is described by the
Management
Information
Base
(MIB
)
for
the Bandura Cyber TIG. Following are the MIB files supplied with the Bandura Cyber TIG:
● TECHGUARD-Bandura Cyber TIG-MIB.mib
● TECHGUARD-PRODUCTS-MIB.mib
● TECHGUARD-REG-MIB.mib
Particular items of interest in the MIBs include:
● TECHGUARD-Bandura Cyber TIG-MIB::Bandura Cyber TIGCountryTable
● TECHGUARD-Bandura Cyber TIG-MIB::Bandura Cyber TIGRuleGroupTable
● TECHGUARD-Bandura Cyber TIG-MIB::Bandura Cyber TIGThrottleTable
● TECHGUARD-Bandura Cyber TIG-MIB::ruleGroupStatTable
● TECHGUARD-Bandura Cyber TIG-MIB::throttleStatTable
● TECHGUARD-Bandura Cyber TIG-MIB::Bandura Cyber TIGBypass
The Bandura Cyber TIG can asynchronously send these traps:
● TECHGUARD-Bandura Cyber TIG-MIB::Bandura Cyber TIGAlert
● TECHGUARD-Bandura Cyber TIG-MIB::Bandura Cyber TIGThrottleActivated
● TECHGUARD-Bandura Cyber TIG-MIB::bypassChange
3.7.9.1 General Settings
This is where you add information that will identify the Bandura Cyber TIG and its administrator
to your network manager. These values will be read and displayed by the network management
software.
SNMP by default uses UDP port 161. If you change the port number here, you also must use
the same port value for this device in the network management system.
3.7.9.2 SNMP Users
SNMP
Users
are the network management systems that can access the Bandura Cyber TIG's
management data. SNMP versions 2c and 3 have different methods of allowing access, and
both systems can be used simultaneously on the Bandura Cyber TIG.
When adding a new
SNMP V2
user, add the network management system's "Community"
name. The Bandura Cyber TIG will only send management data to computers that belong to this
community. This system of identifying management systems is not secure, although it may be
adequate for many organizations. You can define more than one community on the Bandura
Cyber TIG.
71
