authentication server to determine whether access can be allowed to a given system. You can
set the following parameters in :
● Port
● Timeout (seconds)
● Pre Shared Key
● Primary Server
● Backup Server 1
● Backup Server 2
3.7.12 SMTP
SMTP messages are sent when an Alert gets triggered, a Throttle is automatically activated, or
an Alarm is raised (e.g. an update fails or an account gets locked out). You can set the following
parameters in SMTP:
● Enable
SMTP
Alerts
●
SMTP
Host
:
The hostname or IP address of the mail server
●
SMTP
Port
:
The port of the mail server, typically 25 or 587 for SMTP, or 465 for SMTPS
●
SMTP
Protocol
:
Whether to use SMTP or SMTPS (SMTP over SSL).
●
Username
:
Username if the server requires authentication
●
Password
:
Password if the server requires authentication
●
From:
Address
:
Password if the server requires authentication
●
To:
Address
:
The email address alerts will be sent to After you fill out the information
click the Submit button to save.
Test if your SMTP is working by clicking on
Send Test Message
.
74