3.6 Network
3.6.1 Admin Interface
MISCONFIGURATION WILL RENDER THE WEB INTERFACE INACCESSIBLE
Admin Interface
is used to assign an internet address to the Bandura Cyber TIG administration
port, allowing remote administration of the Bandura Cyber TIG Security Appliance. The Bandura
Cyber TIG accepts both Internet Protocol versions 4 and 6 addresses.
Please consider the following when changing the Bandura Cyber TIG's network address:
● The Bandura Cyber TIG and your management computer both need ready access to
network cabling for both the old and new networks.
● Properly identify the Administrative
Ethernet
Network
Port
on the Bandura Cyber TIG, as
illustrated in the Physical
Features
diagrams.
● By default, a new Bandura Cyber TIG will allow all network
traffic
to and from the
Internet.
● A new Bandura Cyber TIG has an Internet address of 192.168.1.1
and your
management computer must be configured for this network.
● After entering your new address information, you will be disconnected
from the graphical
administrator interface.
If the Bandura Cyber TIG is misconfigured and inaccessible, you can restore your Bandura
Cyber TIG via Maintenance Mode.
50
