Configuring a New Bandura Cyber TIG
● Review this manual thoroughly and consider your security plan.
● Configure your computer to have an internet address in the range of 192.168.1.12 to
192.168.1.254. To avoid any network routing problems, you may want to turn off any
other internet connections on this computer, such as WiFi.
● Connect your computer to the Admin port on the Bandura Cyber TIG, using a standard
UTP CAT5, CAT5e or CAT6 ethernet cable.
● The IP address of the Bandura Cyber TIG’s Administration Interface is 192.168.1.1, with
a network mask of 255.255.255.0.
● Configure the Bandura Cyber TIG according to this manual and your security plan and
place the Bandura Cyber TIG in your network.
2.2 First Login
2.2.1 Accessing the Bandura Cyber TIG
The setup process consists of readdressing the ‘Admin’ port of the Bandura Cyber TIG to fit
within your internal private networks. By default, the address is 192.168.1.1. Unless this address
is within one of your private networks, it will need to be readdressed.
Open a terminal or command prompt and ping the address with the following commands so we
can monitor when we have established a connection:
●
Linux or Mac:
ping 192.168.1.1
10
