See the
section of the manual for a list of MIB
s for SNMP. The MIBs for traps
include:
● TECHGUARD-Bandura Cyber TIG-MIB::Bandura Cyber TIGAlert
● TECHGUARD-Bandura Cyber TIG-MIB::Bandura Cyber TIGThrottleActivated
● TECHGUARD-Bandura Cyber TIG-MIB::bypassChange
3.7.10 NTP
The Network Time Protocol is a standard system for synchronizing the built-in clocks of network
connected devices, to a very high degree of precision. Connecting your Bandura Cyber TIG to
the NTP network will ensure that the timestamps on its log files are accurate and coordinated
with the computers in your organization.
The Bandura Cyber TIG supports NTP version 3. Enter the IPv4 or IPv6 Internet address of your
organization's NTP server, or if one isn't available, select a public server. Lists of time servers
can be found at The NTP Public Services Project:
. NTPv3 has optional
authentication. If needed, click "Use Preshared Key" and enter the key information used by your
selected time server.
For more accurate time synchronization, and as a guard against network outages, configure
more than one timeserver.
3.7.11
Terminal
Access
Controller
Access-Control
System
Plus
(
)
is an authentication
protocol that allows a remote access server to forward a users logon password to an
73
