18
Determine the centre position
If your television is equipped with the
optional motorised stand, the STAND
ADJUSTMENT menu appears on the screen.
Once the centre position is determined, select
your favourite positions for when the
television is switched on and in standby.
When the STAND ADJUSTMENT menu
appears …
> Press
GO
to start stand adjustment.
> If the adjustment is interrupted the text
‘ADJUSTMENT FAILED’ appears on the screen.
Remove obstacles preventing the television
from turning, and press
GO
to start adjustment
again.
> Once adjustment is complete, the text
‘ADJUSTMENT OK’ appears, followed by the
STAND POSITIONS menu.
> Move between the different stand positions;
VIDEO, AUDIO and STANDBY by means of
and and press
GO
to enter the menu.
> To turn the television, press or .
> Press the green button to store each of the
positions.
Make sure that there is enough room for the tele-
vision to turn to the right and left.
For further information about stand positions,
refer to the chapter ‘Set positions for the tele-
vision to turn to’ on page 28.
>> First-time setup of your television
STAND ADJUSTMENT
CALIBRATING . . .
CENTRE POSITION
Downloaded from
Summary of Contents for BeoCenter 6
