Connecting source systems to BeoLab Transmitter 1 9
3
rd
party product using TOSLINK (S/P-DIF)
Connect 3
rd
party products to the BeoLab Transmitter 1 using a TOSLINK cable. The volume of the signal must be adjusted from the audio system.
B&O INPUT
Remember to set the
B&O INPUT
switch to
NO
.
In case a Bang & Olufsen product is connected
additional to the 3
rd
party product the switch is
set to
YES
.
SUB 2.1
With a stereo only signal as input and a wireless subwoofer available,
set the
SUB 2.1
switch to
ON
. The bass management function of the
BeoLab Transmitter 1 provides the subwoofer signal to a wireless subwoofer
indicated as the third sound channel (PL 2 L).
The cut-off frequency for the Bass management is 120 Hz.
See the guide for BeoLab Transmitter 1 for variety in speaker combinations.
100 - 240V 50/60Hz
TOSLINK
Out
Audio
product
