Set up BeoLink Gateway - Setup - Date & Time
23
Date & Time
Correct time setting is important
for the monitoring of events,
astronomic clock events and for
time stamping the error log.
The system will work even if the
time setting is not correct.
The date and time settings can
be synchronized with universal
time servers (recommended) if
the BeoLink Gateway has access
to the Internet. Else date and
time can be set manually.
Date
Settings for year, month and day
are entered and then press
Set
.
Time
Settings for hours, minutes and
seconds are entered and then
press
Set
.
Synchronize from internet
Synchronizing with an external time server by setting the check mark
√
. Remove the check mark to disable the synchronization with the time
server.
Time zone
Setting for the time zone is chosen from the drop down list. Choices are made based on an appropriate match of ‘Continent’/’City’.
Location settings (Astronomical Clock)
The Location settings are used by the BeoLink Gateway to calculate, e.g. sunrise and sunset. Events can then be set relative to this.
Latitude and longitude are the settings for the astronomic clock.
The settings are in decimal degrees. Values are entered in the format ‘degrees.minutes’. Seconds are only used to round the minute-value.
Positive values are for North and East.
Negative values are for South and West.
