background image

33

The built-in Peripheral Unit 

Controller (PUC) acts as an 
interpreter between connected 
video equipment, such as a set-
top box, video recorder or Blu-
ray player, and your Bang & 
Olufsen remote control. 

Use the Bang & Olufsen remote 
control to gain access to the 
functions offered by your non-
Bang & Olufsen equipment. 

When you switch on the 

equipment, the functions are 

available via a menu-overlay on 
the television screen, or via the 
Beo6 display. 

For instruction in the various 

functions offered by your 

equipment, see the product’s 
own guide. 

Some features and functions of the 
television may not be available when 

non-Bang & Olufsen equipment is 

connected. Not all connected video 

equipment are supported by Bang & 

Olufsen. For more information about 

supported equipment, contact your 
retailer. 

Operate other equipment with Beo4 or Beo6 

With a Beo4 remote control, some 
functions are available directly via Beo4 
when you switch on the equipment. 

Additional functions are available 

through a menu overlay that you bring 
up on the screen. In this menu, you can 

see which Beo4 buttons activate specific 

services or functions. 

Your Bang & Olufsen retailer can provide 

you with a ‘PUC mapping’ overview 
which explains operation of the connec-
ted equipment with Beo4 in more detail. 

Press the source button 
configured for a connected 
piece of equipment to switch it 
on, such as 

DVD

  

Press to bring up the main 
menu including source related 
functions 

Press to activate the function 
you want

Example of a menu overlay. The Beo4 
buttons are shown to the right on the menu, 

and the functions they control are shown to 

the left. The menu may also list buttons on 

the remote control included with your 
connected equipment. 

Use the Beo4 remote control 

Direct Beo4 operation 

If you know which coloured Beo4 button 
activates the function you want, you can 
activate the function without bringing 

up the menu overlay first. 

While your equipment is on … 

Press to activate a function 

Press and hold to bring up the 
Programme Guide or the ‘Now/
Next’ banner on the screen if 
you are using equipment that 
supports these functions 

Press to activate the function 
you want 

Some IR-controlled PUC equip ment have to 

be switched on using 

SHIFT

 + 

9

 on your 

Beo4 remote control. In order to display 

SHIFT

 on Beo4, you must first add it to the 

Beo4 list of functions.

SOURCE LIST

SETUP

PROGRAMME GUIDE

CHANNEL LIST

INFORMATION

CHANNEL GROUPS

SUBTITLES LANGUAGE

AUDIO LANGUAGE

1

2

3

DVD

MENU

0 – 9

or

MENU

0 – 9

Summary of Contents for BEOPLAY V1 Series







































Reviews: