background image

5

>> Understanding the guide

If you have a Beo4 remote control with 
navigation button, you use the 

centre

 

button with up, down, left and right 
movement to navigate in menus. Press 
in the middle of the 

centre

 button to 

confirm selections and settings in 

menus. 

Bring up the menu overlay by pressing 

MENU

 while the television is on. 

To back up through menus, press 

BACK

To exit menus, press and hold 

BACK

Note that your Beo4 remote control 
must be set to 

MODE 1

, see ‘

How do I…

’ 

in Getting Started. You cannot use a 
Beo4 remote control without navigation 
button. 

Beo4 with navigation button

Beo6

If you operate your television with the 
Beo6 remote control, you use the 

centre

 

button with up, down, left and right 
movement to navigate in menus. Press 
in the middle of the 

centre

 button to 

confirm selections and settings in menus. 

Bring up the menu overlay by pressing 

Menu

 while the television is on. 

To back up through menus, press 

BACK

To exit menus, press and hold 

BACK

Note that a Beo6 should be reconfigured 

when you add new products to your setup. 

The BeoRemote app allows you to 

operate your television with a tablet 
and is especially useful for navigating in 
web pages or applications using 

WebMedia

.*

1

 Both your television and 

tablet must be on the same network 
and WAKE ON WLAN must be set to ON, 

see the television NETWORK menu. This 
allows you to switch on your television 

from standby mode. Note that the 

standby power consumption will 
increase slightly.

BeoRemote is equivalent to a Beo4 
remote control. However, it does not 
support all Beo4 

LIST

 functions.

Tap on the menu icon ( 

 ) to open the 

television menu. The navigation pad 

(   ) works as the Beo4 navigation 

button. Tap in the middle to select a 
setting. Swipe to the list options to 
activate television functions.

To back up through menus, tap 

To exit menus, hold 

BeoRemote has a short built-in guide 
which describes basic functions (found 
under SETTINGS).

Note that first-time setup must be 

performed using a Beo4/Beo6 remote 
control. BeoRemote requires that your 

television is set up in a network.

BeoRemote app

ST

OP

PLA

Y

BA

CK

Centre

 and 

naviga tion 

button

Your tablet and your television must be on 

the same network to use the BeoRemote 
app.

1

*BeoRemote supports tablets with iOS 

(most recent iOS version) and Android (3.2 

or higher).

iOS 

Android 

Centre

 and 

naviga tion 

button

Summary of Contents for BEOPLAY V1 Series







































Reviews: