6
Connections
The connection panel on your
television allows you to connect
a variety of extra equipment,
such as a Blu-ray player.
Any equipment you connect to
these sockets can be registered
in the SOURCE LIST SETUP menu.
For more information,
see page 11
.
Before you connect any equipment
to your television, remember to
disconnect the television from the
mains. Except when connecting a
source to the HDMI IN or USB socket.
Depending on the type of equipment
you connect to the television,
different cables and maybe also
adaptors are needed. Cables and
adaptors are available from your
retailer.
Loudspeakers
Use Bang & Olufsen BeoLab speakers.
Cables are available from your Bang &
Olufsen retailer.
See page 9
.
Equipment with HDMI™ output
Equipment with HDMI output such as a
set-top box can be connected to any
available HDMI IN socket in the television.
For more information on how to set up
connected equipment,
see page 11
.
A configured source can be selected with
the configured source button or in the
SOURCE LIST. If the television detects an
unconfigured source, you are asked to
choose between doing nothing, showing
the source or configuring it.
Connected equipment can be operated
with its own remote control or you may
download a PUC table to use a Beo4/Beo6
remote control,
see page 11
.
HDMI IN
PL 1–3
PL 1–3
If you need to reset your television to default
settings, then bring up the REGIONAL
SETTINGS menu and select another country.
You will be asked to confirm the reset. All
settings will be deleted and you must go
through first-time setup, follow on-screen
instructions.
