background image

9

>> Connections 

Connect speakers to the television 

You can connect up to six speakers and a 

subwoofer to the television. 

Disconnect all relevant systems from the 
mains before you connect additional 
equipment. 

Depending on the type of equipment you 

connect to the television, different cables 
and maybe also adaptors are needed. Cables 
and adaptors are available from your retailer. 

Connect speakers 

> Connect a Power Link cable to the 

appropriate socket (L or R) on the speakers 
you wish to connect to the television. 

> Run the cables to available sockets marked 

PL 1–3 on the television. 

> Run a Power Link cable between the 

appropriate sockets on additional speakers, 
if available.

> Connect a Power Link cable to the 

appropriate socket on a subwoofer. 

> Run the cable to an available socket 

marked PL 1–3 on the television. 

> Reconnect the television and the 

connected equipment to the mains. 

To connect two speakers to one PL socket a 

special cable is needed. If it is not possible to 
loop the cable between two speakers, an 
extra splitter is needed, contact your retailer 

for more information. 

PL 1

PL 2

PL 3

Example of a speaker setup. 

Rear speaker 

Rear speaker 

Subwoofer 

Front speaker 

Front speaker 

Summary of Contents for BEOPLAY V1 Series







































Reviews: