How to use the pincode system
The use of a pincode means that if
your music system has been
disconnected from the mains for
more than approximately 30 minutes,
it can only be activated again by
switching it on and keying in your
pincode via the close-up operation
panel.
If the pincode is not entered, the
music system automatically switches
to standby after approximately three
minutes.
You can change your pincode, but it
is only possible to change it five times
within a period of three hours.
You choose whether or not to
activate the pincode system. The
pincode system is deactivated when
you delete your pincode.
What’s on the PINCODE SETUP menu
…
NEW PINCODE …
Use this menu to enter or
change your pincode.
DELETE PINCODE …
Use this menu to deactivate
the pincode system.
To open for Mastercode input
…
> While the music system asks for your pincode,
press and hold to open for Mastercode input.
> Enter the Mastercode.
> Once you have entered the Mastercode, the pin-
code system is disabled and the music system is
ready for use. To activate the pincode system
again, you must enter a new pincode.
Useful hints
…
If you enter a wrong pincode, you get four more
attempts to key in the code, after which the music
system switches off and cannot be switched on
again for three hours.
If UNLOCK SYSTEM appears in the display the fi rst
time you activate a function, and you have not
received a PIN code from your Bang & Olufsen
retailer, contact your retailer to receive a PIN code
before proceeding.
Should you forget your pincode, please contact
your Bang & Olufsen retailer who will assist you in
getting a Mastercode from Bang & Olufsen. You
need the Mastercode to reactivate your music
system.
20
To call up the pincode menu, press MENU and
then press
l
twice followed by STOP.
PINCODE SETUP
…
1 NEW
PINCODE
2 DELETE
PINCODE
