Cautions
Make sure that the music system is set up, placed
and connected, in accordance with the
instructions in this guide. To prevent injury, use
Bang & Olufsen approved stands and brackets
only.
Place your music system on a firm surface,
preferably on the table, sideboard or stand where
you want it placed permanently.
The music system is designed for indoor use in dry,
domestic environments only, and for use within a
temperature range of 10 – 40º C (50 –105º F).
Avoid placing the system in direct sunlight, near
radiators or other sources of heat.
Allow a space of at least 5 cm (2") each side of
the music system for adequate ventilation.
Remember to leave enough space at the top for
the glass door to open.
If you want to hang the music system on a wall,
make sure that you use the correct size and type
of screws and wall plugs for mounting the wall
bracket (optional accessory) and the BeoSound.
The type of screws and wall plugs will depend on
the material and construction of the wall.
Do not switch on the mains for any products in
your system, until after you have connected all the
cables.
Cable guide and cables:
If you place the music
system on its own, make sure the cables are lead
through the cable guide. Otherwise, the mains
lead can be tugged free from the socket.
If you want to mount the music system on a stand
or bracket, you must remove the cable guide. For
further information on how to mount your music
system on a stand or bracket, refer to the Guide
enclosed with the stand or bracket.
We recommend that you follow this
procedure when you set up your
music system:
1 Place the music system where you
want to use it.
2 Set up your speakers and any
auxiliary equipment.
3 Connect all cables to their sockets
on the socket panel of the music
system – remember not to connect
it to the mains yet!
4 Arrange the cables in the cable
cover grooves and attach the cable
guide.
5 Mount the glass door.
6 Connect the products to the mains.
Setting-up
22
