You can use your music system as a
stand-alone system or as a Audio/
Video system, if you connect the
systems with a Master Link cable.
If you connect your music system and
your video system, you must make
sure that they are set up to function
together. This means that you have
set it to the correct Option with Beo4
as described on this page.
Audio/video setup
To program Option for your audio system
with the Beo4 remote control
…
> While holding down the • button, press
LIST
.
> Let go of both buttons.
> Press
LIST
repeatedly until OPTION? is shown in
the Beo4 display and press
GO
.
> Press
LIST
repeatedly until A.OPT is shown in
the Beo4 display and then key in the
appropriate number (
0
,
1
,
2
,
5
or
6
).
Choose V.OPT to program Option for your video
system.
The music system has fi ve different Option
settings:
Option 0.
Used when your music system is
connected to your video system and no
speakers are connected directly to your music
system.
If you wish to change the Option setting to 0
from any other setting, change it fi rst to 1
before changing it to 0.
Option 1.
Used when your music system is set up
on its own or connected to a video system,
when speakers are connected to your music
system.
Option 2.
Used when your music system is set up
in one room and connected to a video system
set up in another room.
Option 5.
Used when your music system is set up
in a link room which also comprises a Bang &
Olufsen television.
Option 6.
Used when your music system is set up
in a link room
without
a Bang & Olufsen
television.
An Audio/Video system. When your music system
is connected to a video system and the speakers
are connected to the video system, the video
system takes over some of the functions
mentioned in this Guide, for example
programming a Timer.
The music system as a stand-alone system.
An Audio/Video integrated system set up in one
room.
An Audio/Video integrated system set up in two
rooms.
Option 1
Option 2
Option 0
Option 1
Option 1
Option 2
Option 2
26
