2.1
Contents, English
#1 Introduction
#2
Repair of BeoVision 1
#3 Fault fl ow chart
#4
Removal of the cloth front
#5
Removal of the contrast screen and cleaning the BeoVision 1
#6
Adjustments after replacement of main chassis
#7
Check after replacement of main chassis or modules
9.1
Illustrations
10.1 Disassembly/Assembly
11.1
Main chassis in serviceposition
12.1
Replacement of main chassis
13.1
Replacement of PCB10 (BV1) / Sound/DVD chassis (BC1)
14.1
Replacement of other modules
15.1
Survey of modules
Survey of symbols:
Make a shortcircuit between the marked points, usually for discharging
e.g. a picture tube
Push with fi nger, in arrow direction
Disconnect internal plug
Connect internal plug
Disconnect mains plug
Connect mains plug
Disconnect aeriel or other external plug
Connect aeriel or other external plug
Loosen/remove or fasten/install screw
Dashed arrow. Push/pull e.g. PCB, chassis etc. in arrow’s direction
Filled arrow. Refer to page/chapter for more information, e.g. 14.1 PCB20,
if mounted:
Turn to 14.1 PCB20 and remove or install PCB if such is mounted
ABO-CENTER
v/HENRIKSENS
ELEKTRONIK
