26
Register additional video equipment
If you connect additional video
sources or equipment to your
BeoVision 5, then you must register
the equipment in the
Connections
menu.
The settings you select in the
Connections menu tell the
BeoVision 5 what is connected.
For information about where and
how to connect extra equipment,
refer to the chapters
Connect
additional equipment
on page 24 as
well as
Socket panels
on page 28.
What is connected?
Registering the equipment connected to
BeoVision 5 enables you to activate it with the
Beo4 remote control.
Setup
1 Tuning
2 Sound
3 Picture
4 Stand
5 Connections
6 Menu
7 Clock
V. Tape
AV
Decoder
V. Tape
DVD
Decoder
> Press
MENU
to call up the main menu.
> Press
3
to call up the
Setup
menu.
> Press
4
to call up the
Connections
menu (
5
if a
motorised stand is installed).
> Press
tt
to select a socket.
> Press
▲
or
▼
to step through the list of
available equipment types until you find what
you have connected. Select
None
if nothing is
connected.
> When you have selected your equipment types,
press
GO
to store your settings or press
EXIT
to
leave all menus without storing.
