Speaker group
Select the speaker group to be used with this source.
For more information about setting up speaker groups, press the
red
button in the on-
screen help and find '
Sound settings
'.
Picture off
Select whether the picture on the TV screen should switch off when you select an audio
source. Options are
Timeout
for the picture to switch off when a source has not been
operated for a while,
Never
for the picture to remain on and
Always
for the picture to be
switched off as soon as you select the source.
When the picture is switched off, you can still hear the sound of the source. If you have
selected
Timeout
and the picture has faded out, you can activate the picture again if you
press
INFO
or the
centre
button.
Picture mode
Select a picture mode to be used for the selected source.
General
: Continuously and automatically adjusts the picture to the signal and the
viewing conditions.
Movie
: Continuously and automatically adjusts the picture to the signal and the
viewing conditions. The colour temperature is set to 6500 K.
Game
: Adjusts the picture to use the screen as a monitor for a connected game
console or PC. It minimises the video delay and add signal processing for optimal
picture.
Monitor
: Adjusts the picture to use the screen as a monitor for PC application. It
minimises the video delay and neutralises all signal processing for unaltered
picture. The colour temperature is set to 6500 K.
Picture format
Set up a picture format to be used each time you activate the source.
Auto
: Reduces black bars at the top and bottom. The picture is scaled without
changing the picture geometry. However, if a 4:3 source signals a wrong aspect
ratio, the picture will be stretched horizontally.
Auto wide
: Reduces black bars at the top and bottom. Furthermore, the picture
is scaled and stretched horizontally to reduce black bars on the left and right
and to fill out as much of the screen as possible.
Note, that you can select additional picture formats in the
Options
menu found in
LIST
on
your remote control.
If
Auto
or
Auto wide
do not give a satisfactory result due to incorrect format information
from the source, you can select additional picture formats in the
Options
menu found in
LIST
on your remote control. Select one of the formats
Fixed A
–
Fixed D
until you obtain
the optimum picture format. When you have selected
Fixed C
or
Fixed D
, you can
use
and
to move the picture up and down.
21
Summary of Contents for BeoVision Avant-55
Page 1: ......
