49
To watch Camcorder recordings…
> Connect your Camcorder and start playback on
the Camcorder.
> Press
TV
to switch on the television. The
Camcorder signal appears automatically.
If the signal from the Camcorder is switched
off…
> Press
LIST
repeatedly to display CAMCORD on
Beo4 and press
GO.
In order to display CAMCORD on Beo4, you must
first add it to the Beo4 list of functions. For further
information, refer to the chapter ‘Customise Beo4’
on the CD-rom.
Watch Camcorder on your television
To watch your Camcorder recordings, connect
the Camcorder and switch the television on.
When you start playback on your Camcorder,
the television automatically registers the
signal and you can see the pictures from the
Camcorder on the screen.
To copy a recording from a Camcorder…
> Connect your Camcorder and start playback on
the Camcorder.
> Press RECORD twice to start recording.
Choosing another source or switching off the
television during recording from a Camcorder
disrupts recording. It is not possible to view TV
programs during recording.
Copy from a Camcorder
If you have connected a video tape recorder,
such as a BeoCord V 8000, to your television,
and you connect your Camcorder to the
close-up socket panel, you can copy
Camcorder recordings onto a videotape.
Summary of Contents for BeoVision MX 4200
