Marking the contents for recording …
You need to ‘mark’ the contents in the temporary
hard disc storage before it can be recorded to the
hard disc, see
‘Record from the Replay buffer’
on
this page.
To select a recording (programme)
> Press
GO
then the
blue
button to show the
overview panel.
> Press
GO
then or to select a recording.
To find a scene within the recording
> Use or .
To record the current programme
> Press
RECORD
twice. Press
RECORD
again to
start a 30 minutes recording.
To mark for recording from the current scene
> Press the
red
button.
To cancel the marked recording
> Press the
red
button.
To end the recording
> Press
STOP
twice.
When the Replay buffer is on-screen, the DVD
player is in play mode and , , and do not
function as cursor movement. Instead, press the
yellow button on the remote control in Replay
buffer mode to go to the list of programmes, and
press GO then , , or to navigate through
the list.
Record from the Replay buffer
> Press
GO
then the
blue
button on the remote
control to display the replay video bar.
> Use
GO
then or to select a television
programme that can be found in the temporary
hard disc storage.
> Use or to search for the beginning of the
scene where you want to start recording, then
press
STOP
.
> Press the
red
button on the remote control to
start recording from here.
> Press
GO
to continue playback.
> Press to search for the point where you want
to end the recording and press
STOP
twice on
the remote control. A red marking will be visible
on the video bar to indicate the marked
recording.
> Press
GO
to continue playback or press
GO
then the
yellow
button to go to the live signal
in the DVD player.
What clears the contents in the Replay buffer …
Executing the following actions will clear the
contents in the temporary hard disc storage:
– Press
GO
then
5
on the remote control for
access to the camcorder mode.
– Enter the SETUP option in the system menu.
– Change the RECORD MODE.
– Switch the DVD player to standby mode
If you execute the first three of these actions, you
will be asked if you want to continue.* To proceed
and clear the contents in the temporary hard disc
storage:
> Press
GO
twice on the remote control to select
YES in the menu, OR
> Highlight NO in the menu and press
GO
twice
on the remote control to exit without accepting
to clear.
*Note that when you press the standby button you
will not be asked if you wish to continue. The DVD
player will switch to standby and the Replay buffer
will be cleared.
25
NOTE! On some Bang & Olufsen televisions you
just need to press RECORD once to start recording.
Summary of Contents for DVD 2
